Where to buy TJA1050 Transceiver?
Looking to buy a TJA1050 high speed CAN transceiver in bulk? This high quality TJA1050 transceiver for sale is affordable, delivered fast, and the originally manufactured part. This TJA1050 arduino is the port between the physical bus and the Controller Area Network (CAN) protocol controller. It gives derived function transmit potentiality to the bus and the derived function get capability to the CAN controller. TJA1050 High speed CAN transceiver is the next Philips high speed controller area network transreceiver after PCA82C250 and PCA82C251.
What makes TJA1050 High speed CAN transceiver different from the two mentioned above is that:
- - It has no standby mode
- - For the purpose of unpowered node, there is an improved behaviour
- - Minimal electromagnetic emission because of the optimal matching of the output signals CANL and CANH.
- - Minimum of 110 nodes could be connected
- - Proof of short-circut to battery and ground
- - There is compatibility of the input level with 3.3 V and 5 V devices
- - It is thermally protected
- - The pins of the bus is protected against the transients in an automotive situation
- - Transmit Data dominant time-out function
- - Bus lines is not disturbed by an unpowered node.
- - Derived function receiver with broad common-mode range for the high Electromagnetic Immunity (EMI)
- - Low Electromagnetic Emission (EME)
- - High speed of about 1 Mbaud
- - Completely compatible with the ISO 11898 standard
All these makes TJA1050 High speed CAN transceiver a suitable application in nodes which are in a power-down condition in the networks that are particularly powered.